Back to the product list
Control Fluid Flow
Pinch Valves & Accessories
Pinch Valves & Accessories
Available in cast iron, aluminum and PVC materials
Pinch valves control the flow of fluids (liquid, gas or power) and provide a leak-proof seal when closed. They are cost-effective, simple to install and require little maintenance.
Share
The valves are made up of a valve body and a cylindrical sleeve reinforced with natural or synthetic rubber. Typically in an open state, the valve is closed by the application of pressure between the valve body and the sleeve. This pressure is created by a fluid, usually compressed air,that crushes the sleeve in a particular direction, completely closing the valve.
- Direct flow with no loss of head
- Bubble free tightness even with the wettest liquids
- Viscous or paste-like liquids pass with no choking or blocking
- Abrasive meterial cause no damages
- No moving parts; hence no maintenance
- Self-cleaning; will not jam or seize
Available in cast iron, aluminum and PVC materials, we offer a complete range of full-bore valves suitable for a range of applications
- Acids: hydrochloric, nitric, sulfuric, hydrofluoric, etc.
- Alkalis: sodium hydroxide, ammonia, potassium, phosphates, sodium bicarbonate, etc.
- Viscous or abrasive liquids: seawater, wastewater, lime wash, paper pulp, paint, sludge, soot, clay slip, etc.
- Edible liquids: beer, wine, cocoa butter, edible oils, beet juice, milk, sugar, syrups, etc.
- Powdered products: cement, flour, sand, talc
- Other fluids: reagents for water treatment, organic solvents, fertilizers, etc
Overview
The valves are made up of a valve body and a cylindrical sleeve reinforced with natural or synthetic rubber. Typically in an open state, the valve is closed by the application of pressure between the valve body and the sleeve. This pressure is created by a fluid, usually compressed air,that crushes the sleeve in a particular direction, completely closing the valve.
Benefits
- Direct flow with no loss of head
- Bubble free tightness even with the wettest liquids
- Viscous or paste-like liquids pass with no choking or blocking
- Abrasive meterial cause no damages
- No moving parts; hence no maintenance
- Self-cleaning; will not jam or seize
Specifications
Available in cast iron, aluminum and PVC materials, we offer a complete range of full-bore valves suitable for a range of applications
Applications
- Acids: hydrochloric, nitric, sulfuric, hydrofluoric, etc.
- Alkalis: sodium hydroxide, ammonia, potassium, phosphates, sodium bicarbonate, etc.
- Viscous or abrasive liquids: seawater, wastewater, lime wash, paper pulp, paint, sludge, soot, clay slip, etc.
- Edible liquids: beer, wine, cocoa butter, edible oils, beet juice, milk, sugar, syrups, etc.
- Powdered products: cement, flour, sand, talc
- Other fluids: reagents for water treatment, organic solvents, fertilizers, etc